UJK Drill Table & Fence - Werktafel voor op je kolomboor compleet met aanslag!
UJK Drill Table & Fence - Werktafel voor op je kolomboor compleet met aanslag!
Op voorraad
Op werkdagen voor 15u besteld wordt dezelfde dag verzonden
- Bel of mail voor professioneel advies
- Gratis op te halen in Haarlem
- 100 dagen bedenktijd
- Gratis verzending vanaf € 250,-*
- (* indien normale afmeting of gewicht)
Productinformatie
Sander zegt
Erg mooi uitgevoerde kolomboor werktafel. Makkelijk te installeren met de klemhaken aan de onderzijde en voorzien van een hele mooie aanslag met stofafzuiging geïntegreerd. Maakt het werken op je kolomboor een stuk sneller en comfortabeler!
- Increases the work area, better support for large woodworking pieces
- Makes drilling safer and more precise
- 26 mm coated phenolic table, 595 x 395 mm in size
- Full length aluminium fence, adjustable fence plates and repeat stop
- L&R scales and rear dust extraction port
- Reversible to suit a wide range of pillar drills
- Toggle clamp system for ease of fitting or removal
- Two toggle clamps included
In detail
Most pillar drills are designed for metal working processes rather than woodworking. This UJK Pillar Drill Table will enhance your pillar drill, supporting the workpiece for better drilling accuracy or for delicate sanding or shaping tasks. Made from 26 mm thick faced phenolic material it features an aluminium extrusion fence with sliding sub faces, a dust port for drum sanding extraction and a flip over length stop for repeat hole positioning. A sacrificial plate protects the centre area.
The fence slides on twin T tracks, into which you can also mount clamps. The sub faces give extra support for long pieces, whilst there is a combined RH/LH scale for the flip over stop.
There are a couple of clever features of note, the sacrificial plate is slightly offset, the whole table being reversible so that a large range of machine throat depths can be accommodated. The other lies underneath, there are two bars which have three alternative mounting positions, giving a width range of between 310 mm-490 mm. There are two toggle clamps also with 50 mm of adjustment, so almost all pillar drills can have this table mounted. Once the mounts are set to your machine, it is a matter of seconds to lift this table on or off.
One final twist is the optional V block, which bolts in place of the sacrificial plate, allowing cylindrical parts to be drilled. There is a centre hole to allow accurate positioning.
Convert your pillar drill into a machine much better suited to woodworking with this nicely designed table.
Leveringsomvang:
- Per stuk (incl. 2 spanklemmen)
Technische gegevens:
- Afmeting tafel: 595x395 mm
- Afmeting T-slot: 14 mm
- Gewicht: 22 kg
Lees meer
- Makes drilling safer and more precise
- 26 mm coated phenolic table, 595 x 395 mm in size
- Full length aluminium fence, adjustable fence plates and repeat stop
- L&R scales and rear dust extraction port
- Reversible to suit a wide range of pillar drills
- Toggle clamp system for ease of fitting or removal
- Two toggle clamps included
In detail
Most pillar drills are designed for metal working processes rather than woodworking. This UJK Pillar Drill Table will enhance your pillar drill, supporting the workpiece for better drilling accuracy or for delicate sanding or shaping tasks. Made from 26 mm thick faced phenolic material it features an aluminium extrusion fence with sliding sub faces, a dust port for drum sanding extraction and a flip over length stop for repeat hole positioning. A sacrificial plate protects the centre area.
The fence slides on twin T tracks, into which you can also mount clamps. The sub faces give extra support for long pieces, whilst there is a combined RH/LH scale for the flip over stop.
There are a couple of clever features of note, the sacrificial plate is slightly offset, the whole table being reversible so that a large range of machine throat depths can be accommodated. The other lies underneath, there are two bars which have three alternative mounting positions, giving a width range of between 310 mm-490 mm. There are two toggle clamps also with 50 mm of adjustment, so almost all pillar drills can have this table mounted. Once the mounts are set to your machine, it is a matter of seconds to lift this table on or off.
One final twist is the optional V block, which bolts in place of the sacrificial plate, allowing cylindrical parts to be drilled. There is a centre hole to allow accurate positioning.
Convert your pillar drill into a machine much better suited to woodworking with this nicely designed table.
Leveringsomvang:
- Per stuk (incl. 2 spanklemmen)
Technische gegevens:
- Afmeting tafel: 595x395 mm
- Afmeting T-slot: 14 mm
- Gewicht: 22 kg
Specificaties
Artikelcode: | 106702 |
---|---|
EAN code: | 5052511120420 |
Review overzicht
0 van 0 beoordelingen
Reviews
Aanmelden
Geen beoordelingen gevonden. Deel als eerste uw inzichten.
Gerelateerde artikelen