Inloggen
Winkelmandje

Miter Express Universal Mitering Platform

Welke lengte heeft u nodig?
/
U heeft 0 stuks nodig voor 0 euro incl. BTW
158,99 131,40 Excl. BTW
Zet op verlanglijstje
Bekijk onze winkels
Niet op voorraad: De volgende Incra levering verwachten wij op zijn vroegst eind juli. Wij importeren Incra zelf uit de USA.
Reviews Schrijf een review
Toevoegen aan favorieten
  • Bel of mail voor echt advies
  • Betaal zoals jij wilt, ook achteraf
  • Gratis verzending vanaf € 100,-*
  • 100 dagen bedenktijd
  • Gratis op te halen in Haarlem
  • Lagere prijs gezien? Samen komen we eruit.
  • Artikelomschrijving & specificaties

Artikel omschrijving

Sander zegt

Komt nog...

Features:
- Doubles Any Miter Gauge's Crosscut Range Up to 24"
- Safely Handles Both Extra Large and Extra Small Workpieces
- Eliminates All Side Play Between Table Saw's Miter Slot and Any Miter gauge
- Dual Embedded T-Tracks Secure the Included INCRA Hold-down Clamp and Other Mitering Accessories
- Eliminates All Drag Between Workpiece and Table Saw, especially for Extra Large Workpieces Superb Crosscut & Mitering Control

Incra Miter Express (standard & shopsmith) compatibility:
Miter slot size:
- The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.762" and is designed for 3/4" wide x 3/8" deep square-sided miter slots, with or without a 15/16" T-slot at the bottom.
- The Shopsmith version fits only the 0.719" x 5/16" slot size and is not compatible with the Shopsmith 10ER models.
Miter slot spacing: The max distance between the miter slots is 14" center-to-center.
Table size: For adequate support, the Miter Express requires a minimum of 11" from the side of the blade to either the left or right edges of the saw (sled can be installed on either side of the blade).

Detail focus:

Lock-in or Remove any Miter Gauge in seconds
. The massive central Utility Plate incorporates a quick-release mechanism that allows you to instantly lock in place or remove any miter gauge that uses a standard- or Shopsmith-sized miter bar. The quick-release feature leaves your miter gauge free for use at other machines in your shop.

The Miter Express features removable front and rear.T-Slot Retaining Clips for sled stability at both the beginning and end of long crosscuts.

The Incra Hold Down Clamp. The Miter Express also includes the new INCRA Hold Down Clamp. This makes miter cuts on small pieces more accurate and secure than ever before while keeping your fingers safely away from the cutter.

Incra's Miter Express offers any miter gauge owner the safest and most accurate cross-cutting platform available. Miter gauge & fence sold separately; use the Miter Express with any standard miter gauge! Available for traditional 3/4" x 3/8" miter slots and Shopsmith machines. Shown above with an optional Incra Miter 1000SE mounted and ready, the Express features 2 embedded T-Slot channels to secure the included Hold Down Clamp and Outboard Fence Support. These slots are also invaluable for mounting your own custom Jigs and Fixtures.

The advantages are simple: The Miter Express doubles your miter gauge's capacity for cutting large panels, it offers more hold down options for greater safety when cutting small parts, and it provides better control overall because the lumber is carried through the blade instead of pushed across the saw.

The Express assembles quickly on either side of the saw blade, and the panels are custom-fit to your saw with two quick cuts and no measuring or alignment. It couldn't be easier! The sliding main panel and locking drop-off panel provide a level surface and perfect zero-clearance tearout control on both sides of the blade.

Crosscut Capacity
Doubles Any Miter Gauge's Crosscut Capacity to 24" and Securely Holds Even the Smallest Workpieces for Safe Accurate Cuts
The crosscut capacity of any miter gauge is safely doubled to more than 24" when docked on top of the Miter Express. For these extra-large crosscuts, the non-drag support provided by the sliding panel, along with the extra holding power of the included Hold Down Clamp adds much needed stability and control. As shown on the right, the same INCRA Hold Down Clamp also keeps your fingers comfortably away from the blade when cutting workpieces that are too small to safely hold by hand.

The Miter Express also includes an Outboard Fence Support that locks behind your fence in one of the two T-Slots, providing even more rigidity for all operations.

Great News for Shopsmith Owners!
Shopsmith’s unique miter slot size has previously made it difficult to upgrade the miter gauge, but the Shopsmith version of the Miter Express allows you to mount any brand of miter gauge to the sled platform (optional Miter 1000SE shown), and it works with the Shopsmith gauge, too!

Miter Express for Shopsmith
Assembles easily and 2 cuts give you zero clearance forever
The sliding main panel and the locking drop-off support panel are each trimmed with one simple cut during assembly for a perfect fit on YOUR table saw. The result is true Zero-Clearance Tearout Control on BOTH sides of the blade. The Miter Express is instantly removable from your saw table when making rip cuts or other operations that don't require a sled. And thanks to INCRA's quick release feature, your miter gauge undocks from the Express in seconds whenever you want to use your gauge on another tool such as a router table or sanding station.

T-Slot Retaining Clips & Adjustable Miter Bar
The Miter Express features a miter bar that's conveniently adjustable from above for a perfect fit in the miter slots of either traditional 3/4" x 3/8" or Shopsmith sizes.It also features removable front and rear T-Slot Retaining Clips for sled stability at both the beginning and end of long crosscuts. The clips allow the Express to support itself as it's drawn back from the blade to simplify loading large panels.

Technische gegevens:


- Gewicht: 5 kg (11,01 lbs)

Specificaties

GebruikGeleiden
TypeGeleiderails
Zaagtafel toebehoren
MerkIncra
CategorieFrees toebehoren
ArtikelcodeMiterExpress
VerpakkingStuk(s)

Schrijf een review

Aantal sterren
     
   
Plaats review

Aanmelden nieuwsbrief

Winkelmandje

Filter

20190520 19:10:21 PC00False0FalseTrue0