Axminster Shokunin Japanse Afvlakzaag dubbele zaag - 125 mm / Flushcut Saw
Productinformatie
Sander zegt
Komt nog…
- Perfect for cutting the protruding dowels or tenons
- Highly flexible double-edged blade
- Made for both hardwoods and softwoods
- Zero set on teeth; will not mar the surrounding surface
- Handle made from beechwood
In detail
A small saw, traditionally used in Japanese joinery for flush trimming protruding wooden or bamboo nails, used to pin joints. The thin blade is incredibly flexible. Even after bending beyond 90° it springs back true. The crosscut teeth of this saw have zero set. It can cut a dowel or tenon flush without marring the surrounding surface.
When using this saw, it helps if you gently rest the fingers of your free hand on the back of the blade just behind the cut. This gives much greater control. The blade has two edges, a fine tooth pitch on one side for hardwoods and a slightly coarser pitch on the other for softwood. The blade length is 125mm fitted with a beechwood handle, overall length 270 mm.
Leveringsomvang:
- Per stuk
Technische gegevens:
- Bladdikte: 0,3 mm
- Zaagsnede: 0,30 mm
- Bladlengte: 125 mm
- Totale lengte: 270 mm
- Tanden per inch / tpi afkorten 1,00 mm: 25 tpi
- Tanden per inch / tpi afkorten 1,27 mm: 20 tpi
Lees meer
- Highly flexible double-edged blade
- Made for both hardwoods and softwoods
- Zero set on teeth; will not mar the surrounding surface
- Handle made from beechwood
In detail
A small saw, traditionally used in Japanese joinery for flush trimming protruding wooden or bamboo nails, used to pin joints. The thin blade is incredibly flexible. Even after bending beyond 90° it springs back true. The crosscut teeth of this saw have zero set. It can cut a dowel or tenon flush without marring the surrounding surface.
When using this saw, it helps if you gently rest the fingers of your free hand on the back of the blade just behind the cut. This gives much greater control. The blade has two edges, a fine tooth pitch on one side for hardwoods and a slightly coarser pitch on the other for softwood. The blade length is 125mm fitted with a beechwood handle, overall length 270 mm.
Leveringsomvang:
- Per stuk
Technische gegevens:
- Bladdikte: 0,3 mm- Zaagsnede: 0,30 mm
- Bladlengte: 125 mm
- Totale lengte: 270 mm
- Tanden per inch / tpi afkorten 1,00 mm: 25 tpi
- Tanden per inch / tpi afkorten 1,27 mm: 20 tpi
Specificaties
Artikelcode: | 105019 |
---|---|
EAN code: | 5052511101924 |
Type: | Handzaag |
Gebruik: | Zagen |
Review overzicht
Reviews
Aanmelden
April 11, 2020 12:01
-
Hallo, hoeveel tijd heb ik te wachten op Axminster Shokunin Japanse Afvlakzaag dubbele zaag - 125 mm / Flushcut Saw