UJK Miter Slot Track 915 mm / Mitre Slot Track 36 inch
UJK Miter Slot Track 915 mm / Mitre Slot Track 36 inch
Niet op voorraad
Verwachte levertijd in 28 dagen
- Bel of mail voor echt advies
- Gratis op te halen in Haarlem
- 100 dagen bedenktijd
- Gratis verzending vanaf € 250,-*
- (* indien normale afmeting of gewicht)
Productinformatie
Sander zegt
Mooie oranje(!) mitertrack van UJK. Net even wat breder dan de Incra Miterchannel doordat de zijwanden iets dikker zijn en geprofileerd zijn om in een gefreesde groef te persen. Misschien daardoor nét wat beter om te installeren. Of omdat je het oranje gewoon mooier vindt!
- Anodised aluminium mitre slot track for durability
- Add a mitre facility to custom router table etc.
- Standard 19x9,5 mm width of slot
- Accepts standard mitre gauge with or without 'T'
- Supplied in 915 mm (36") lengths easily cut to size
- Requires a groove 31 mm wide x 13 mm deep
- Pre-drilled with countersunk screw holes
In detail
The UJK Technology mitre slot track makes it easy to add a mitre fence facility to a custom built router table, saw table or bandsaw table. It is equally useful for a workbench that needs to incorporate a mitre fence.
The track is anodised aluminium for its durability. All it requires is a routed groove 31 mm wide by 13 mm deep. Alternatively, you can create laminated table using a base and 12,7 mm (1/2") thick material on either side of the track. Securing the track in the groove is easy with pre-drilled, countersunk holes every 270 mm.
The external measurements overall are 915 mm (36") long, 31x12,7 mm deep and the T-slot is 19x24x9,5 mm deep. With its 19mm wide channel, the mitre slot track will work with any standard 19x9,5 mm (3/4" x 3/8") mitre gauge bar with or without a T-facility. Supplied in 915 mm lengths, the track is easily cut with a hacksaw to a different size if required.
Leveringsomvang:
- Per stuk
Technische gegevens:
- Materiaal: geanodiseerd aluminium
- Lengte: 915 mm (36")
- Breedte buitenzijde: +/- 30,6 mm
- Hoogte profiel buitenzijde: +/- 12,7 mm
- Add a mitre facility to custom router table etc.
- Standard 19x9,5 mm width of slot
- Accepts standard mitre gauge with or without 'T'
- Supplied in 915 mm (36") lengths easily cut to size
- Requires a groove 31 mm wide x 13 mm deep
- Pre-drilled with countersunk screw holes
In detail
The UJK Technology mitre slot track makes it easy to add a mitre fence facility to a custom built router table, saw table or bandsaw table. It is equally useful for a workbench that needs to incorporate a mitre fence.
The track is anodised aluminium for its durability. All it requires is a routed groove 31 mm wide by 13 mm deep. Alternatively, you can create laminated table using a base and 12,7 mm (1/2") thick material on either side of the track. Securing the track in the groove is easy with pre-drilled, countersunk holes every 270 mm.
The external measurements overall are 915 mm (36") long, 31x12,7 mm deep and the T-slot is 19x24x9,5 mm deep. With its 19mm wide channel, the mitre slot track will work with any standard 19x9,5 mm (3/4" x 3/8") mitre gauge bar with or without a T-facility. Supplied in 915 mm lengths, the track is easily cut with a hacksaw to a different size if required.
Leveringsomvang:
- Per stuk
Technische gegevens:
- Materiaal: geanodiseerd aluminium
- Lengte: 915 mm (36")
- Breedte buitenzijde: +/- 30,6 mm
- Hoogte profiel buitenzijde: +/- 12,7 mm
Specificaties
| Artikelcode: | 103565 |
|---|---|
| EAN code: | 5052511093809 |
Review overzicht
Reviews
Aanmelden
Geen beoordelingen gevonden. Deel uw inzichten met anderen.
Gerelateerde artikelen
Productgalerij overslaan
UJK Miter & T-Track combinatie 810 mm (32) rail / Mitre Fence-Tee Slot Track
€ 51,44
€ 42,51 Excl. btw
€ 42,51 Excl. btw